How to Attach the V4 Tank Connector to Fermentation Tank

How to Attach the V4 Tank Connector to Fermentation Tank

Notes

Materials Required

  1. Sanitized and Cleaned Tank Connector, see How to Clean and Sanitize the Version 2.0 Fermentation Hub

How to Attach the Version 2.0 Tank Connector to Fermentation Tank

  1. Remove the Valve Release Set from the Tank Connector.  This will close the valves until the Fermentation Hub is attached.
  2. Attach the end cap (or sample valve if you have one available) to the front plate of the Tank Connector using a  tri clamp and gasket
  3. Slide a gasket and the two inch spool over the in-tank tube, connect via tri clamp
  4. Connect the two sides of the Hanger by sliding the lower piece (two parallel legs) over the top piece (tri clamp weld). Screw in the thumb screw loosely.
  5. Make sure the tri clamp part of the top Hanger piece is facing away from the parallel legs of the bottom Hanger piece
  6. Screw the in-tank filter onto the end of the in-tank pipe
  7. Slide a gasket over the in-tank pipe of the Tank Connector
  8. Mount the entire Tank Connector Assembly onto your Fermentation Tank by inserting the in-tank pipe into your tank, and using the tri clamp on the Hanger as the primary clamp
  9. Proceed with the tank’s normal SIP.




    • Related Articles

    • How to Attach the Version 2.0 Fermentation Hub to the v4 Tank Connector Assembly

      Materials required: Clean, Sanitized, and Installed Tank Connector Assembly and Filter - How to Clean and Sanitize the Tank Connector Clean and Sanitized Fermentation Hub - How to Clean and Sanitize the Version 2.0 Fermentation Hub [w/ Video] ...

    • How to Clean and Sanitize the Tank Connector

      Cleaning and Sanitizing Materials Required (1) Bucket (1) Tank Connector Peracetic Acid Cleaner compatible with Stainless Steel - for example PBW, Cell-r-Mastr, or Caustic (1) Valve Release Set for Version 4 Tank Connectors (contains the lever to ...

    • Sennos version 5 Tank Connector SOP

      Materials required: Clean, Sanitized, and Installed Tank Connector Assembly and Filter - How to Clean and Sanitize the Tank Connector Clean and Sanitized Fermentation Hub - How to Clean and Sanitize the Version 2.0 Fermentation Hub [w/ Video] One ...

    • Sennos Fermentation Hub User Guide - Downloadable PDF

      PLEASE NOTE: These User Guides are for Fermentation Hubs ONLY, not the SennosM3 next generation system. There are currently two versions of the Sennos Fermentation Hub. Version 2.0 - features two metal valves on top of the Hub with no hoses. Version ...

    • How to Start Monitoring a Fermentation on a Fermentation Hub

      Materials/Requirements Wi-Fi enabled computer, tablet, or smartphone Clean, Sanitized, and Installed Tank Connector and Filter - See How to Clean and Sanitize the Tank Connector Clean and Sanitized Fermentation Hub - See How to Clean and Sanitize the ...