How to Install Filter Upgrade for Fermentation Hub Cleaning Buckets
In our continuing effort to make the Fermentation Hub cleaning easy and trouble-free, we now require a filter in each of the three (3) cleaning buckets to reduce the chances of debris in the buckets being circulated into the Fermentation Hub and fouling the pumps. The upgrade is expected to take 5 minutes.
In our continuing effort to make the Fermentation Hub cleaning easy and trouble-free, we now require a filter in each of the three (3) cleaning buckets to reduce the chances of debris in the buckets being circulated into the Fermentation Hub and fouling the pumps. The upgrade is expected to take 5 minutes.
Materials Required
- (1) Rinse Bucket
- (1) Clean Bucket
- (1) Sanitize Bucket
- Materials from shipment by Sennos
- (3) Filters and Tubes (connected with an adapter and clamp)
- (3) Additional clamps
Installation of Filters for Cleaning Buckets
1. Place the RINSE, CLEAN, and SANITIZE buckets in front of you
2. Identify the port on the bucket that flows OUT of the bucket and INTO the Hub.
3. On the inside of the bucket, push the open end of the tube+filter onto the barbed end of the fitting on the port you identified in Step 2. Push the tube+filter on as far as possible but with at least 3/4" (2cm) of overlap.
4. Open the clamp, and place it over the tube and barbed fitting. Squeeze the clamp to secure it.
Related Articles
How to Use The Multi-Hub Cleaning Station: Sennos' SaniStation
Cleaning and Sanitizing Materials Required SaniStation Tap Water Connection Sink to drain (or trench drain) 120V Power Outlet Liquid PBW Concentrated PAA Always use PPE (Safety Glasses & Gloves minimum) when working with the SaniStation. Be ...How to Start Monitoring a Fermentation on a Fermentation Hub
Materials/Requirements Wi-Fi enabled computer, tablet, or smartphone Clean, Sanitized, and Installed Tank Connector and Filter - See How to Clean and Sanitize the Tank Connector Clean and Sanitized Fermentation Hub - See How to Clean and Sanitize the ...Sennos Fermentation Hub User Guide - Downloadable PDF
PLEASE NOTE: These User Guides are for Fermentation Hubs ONLY, not the SennosM3 next generation system. There are currently two versions of the Sennos Fermentation Hub. Version 2.0 - features two metal valves on top of the Hub with no hoses. Version ...How to Attach the Version 2.0 Fermentation Hub to the v4 Tank Connector Assembly
Materials required: Clean, Sanitized, and Installed Tank Connector Assembly and Filter - How to Clean and Sanitize the Tank Connector Clean and Sanitized Fermentation Hub - How to Clean and Sanitize the Version 2.0 Fermentation Hub [w/ Video] ...How to Attach the V4 Tank Connector to Fermentation Tank
Materials Required Sanitized and Cleaned Tank Connector, see How to Clean and Sanitize the Version 2.0 Fermentation Hub How to Attach the Version 2.0 Tank Connector to Fermentation Tank Remove the Valve Release Set from the Tank Connector. This will ...